The Python interpreter has a number of functions built into it that are always available. They are listed here in alphabetical order.
Return the absolute value of a number. The argument may be a plain or long integer or a floating point number. If the argument is a complex number, its magnitude is returned.
Return True if all elements of the iterable are true (or if the iterable is empty). Equivalent to:
def all(iterable):
for element in iterable:
if not element:
return False
return True
New in version 2.5.
Return True if any element of the iterable is true. If the iterable is empty, return False. Equivalent to:
def any(iterable):
for element in iterable:
if element:
return True
return False
New in version 2.5.
This abstract type is the superclass for str and unicode. It cannot be called or instantiated, but it can be used to test whether an object is an instance of str or unicode. isinstance(obj, basestring) is equivalent to isinstance(obj, (str, unicode)).
New in version 2.3.
Convert an integer number to a binary string. The result is a valid Python expression. If x is not a Python int object, it has to define an __index__() method that returns an integer.
New in version 2.6.
Convert a value to a Boolean, using the standard truth testing procedure. If x is false or omitted, this returns False; otherwise it returns True. bool is also a class, which is a subclass of int. Class bool cannot be subclassed further. Its only instances are False and True.
New in version 2.2.1.
Changed in version 2.3: If no argument is given, this function returns False.
Return a new array of bytes. The bytearray type is a mutable sequence of integers in the range 0 <= x < 256. It has most of the usual methods of mutable sequences, described in Mutable Sequence Types, as well as most methods that the str type has, see String Methods.
The optional source parameter can be used to initialize the array in a few different ways:
Without an argument, an array of size 0 is created.
New in version 2.6.
Return True if the object argument appears callable, False if not. If this returns true, it is still possible that a call fails, but if it is false, calling object will never succeed. Note that classes are callable (calling a class returns a new instance); class instances are callable if they have a __call__() method.
Return a string of one character whose ASCII code is the integer i. For example, chr(97) returns the string 'a'. This is the inverse of ord(). The argument must be in the range [0..255], inclusive; ValueError will be raised if i is outside that range. See also unichr().
Return a class method for function.
A class method receives the class as implicit first argument, just like an instance method receives the instance. To declare a class method, use this idiom:
class C(object):
@classmethod
def f(cls, arg1, arg2, ...):
...
The @classmethod form is a function decorator – see the description of function definitions in Function definitions for details.
It can be called either on the class (such as C.f()) or on an instance (such as C().f()). The instance is ignored except for its class. If a class method is called for a derived class, the derived class object is passed as the implied first argument.
Class methods are different than C++ or Java static methods. If you want those, see staticmethod() in this section.
For more information on class methods, consult the documentation on the standard type hierarchy in The standard type hierarchy.
New in version 2.2.
Changed in version 2.4: Function decorator syntax added.
Compare the two objects x and y and return an integer according to the outcome. The return value is negative if x < y, zero if x == y and strictly positive if x > y.
Compile the source into a code or AST object. Code objects can be executed by an exec statement or evaluated by a call to eval(). source can either be a string or an AST object. Refer to the ast module documentation for information on how to work with AST objects.
The filename argument should give the file from which the code was read; pass some recognizable value if it wasn’t read from a file ('<string>' is commonly used).
The mode argument specifies what kind of code must be compiled; it can be 'exec' if source consists of a sequence of statements, 'eval' if it consists of a single expression, or 'single' if it consists of a single interactive statement (in the latter case, expression statements that evaluate to something other than None will be printed).
The optional arguments flags and dont_inherit control which future statements (see PEP 236) affect the compilation of source. If neither is present (or both are zero) the code is compiled with those future statements that are in effect in the code that is calling compile. If the flags argument is given and dont_inherit is not (or is zero) then the future statements specified by the flags argument are used in addition to those that would be used anyway. If dont_inherit is a non-zero integer then the flags argument is it – the future statements in effect around the call to compile are ignored.
Future statements are specified by bits which can be bitwise ORed together to specify multiple statements. The bitfield required to specify a given feature can be found as the compiler_flag attribute on the _Feature instance in the __future__ module.
This function raises SyntaxError if the compiled source is invalid, and TypeError if the source contains null bytes.
Note
When compiling a string with multi-line code in 'single' or 'eval' mode, input must be terminated by at least one newline character. This is to facilitate detection of incomplete and complete statements in the code module.
Changed in version 2.3: The flags and dont_inherit arguments were added.
Changed in version 2.6: Support for compiling AST objects.
Changed in version 2.7: Allowed use of Windows and Mac newlines. Also input in 'exec' mode does not have to end in a newline anymore.
Create a complex number with the value real + imag*j or convert a string or number to a complex number. If the first parameter is a string, it will be interpreted as a complex number and the function must be called without a second parameter. The second parameter can never be a string. Each argument may be any numeric type (including complex). If imag is omitted, it defaults to zero and the function serves as a numeric conversion function like int(), long() and float(). If both arguments are omitted, returns 0j.
Note
When converting from a string, the string must not contain whitespace around the central + or - operator. For example, complex('1+2j') is fine, but complex('1 + 2j') raises ValueError.
The complex type is described in Numeric Types — int, float, long, complex.
This is a relative of setattr(). The arguments are an object and a string. The string must be the name of one of the object’s attributes. The function deletes the named attribute, provided the object allows it. For example, delattr(x, 'foobar') is equivalent to del x.foobar.
Create a new dictionary. The dict object is the dictionary class. See dict and Mapping Types — dict for documentation about this class.
For other containers see the built-in list, set, and tuple classes, as well as the collections module.
Without arguments, return the list of names in the current local scope. With an argument, attempt to return a list of valid attributes for that object.
If the object has a method named __dir__(), this method will be called and must return the list of attributes. This allows objects that implement a custom __getattr__() or __getattribute__() function to customize the way dir() reports their attributes.
If the object does not provide __dir__(), the function tries its best to gather information from the object’s __dict__ attribute, if defined, and from its type object. The resulting list is not necessarily complete, and may be inaccurate when the object has a custom __getattr__().
The default dir() mechanism behaves differently with different types of objects, as it attempts to produce the most relevant, rather than complete, information:
The resulting list is sorted alphabetically. For example:
>>> import struct
>>> dir() # show the names in the module namespace
['__builtins__', '__doc__', '__name__', 'struct']
>>> dir(struct) # show the names in the struct module
['Struct', '__builtins__', '__doc__', '__file__', '__name__',
'__package__', '_clearcache', 'calcsize', 'error', 'pack', 'pack_into',
'unpack', 'unpack_from']
>>> class Shape(object):
def __dir__(self):
return ['area', 'perimeter', 'location']
>>> s = Shape()
>>> dir(s)
['area', 'perimeter', 'location']
Note
Because dir() is supplied primarily as a convenience for use at an interactive prompt, it tries to supply an interesting set of names more than it tries to supply a rigorously or consistently defined set of names, and its detailed behavior may change across releases. For example, metaclass attributes are not in the result list when the argument is a class.
Take two (non complex) numbers as arguments and return a pair of numbers consisting of their quotient and remainder when using long division. With mixed operand types, the rules for binary arithmetic operators apply. For plain and long integers, the result is the same as (a // b, a % b). For floating point numbers the result is (q, a % b), where q is usually math.floor(a / b) but may be 1 less than that. In any case q * b + a % b is very close to a, if a % b is non-zero it has the same sign as b, and 0 <= abs(a % b) < abs(b).
Changed in version 2.3: Using divmod() with complex numbers is deprecated.
Return an enumerate object. sequence must be a sequence, an iterator, or some other object which supports iteration. The next() method of the iterator returned by enumerate() returns a tuple containing a count (from start which defaults to 0) and the values obtained from iterating over sequence:
>>> seasons = ['Spring', 'Summer', 'Fall', 'Winter']
>>> list(enumerate(seasons))
[(0, 'Spring'), (1, 'Summer'), (2, 'Fall'), (3, 'Winter')]
>>> list(enumerate(seasons, start=1))
[(1, 'Spring'), (2, 'Summer'), (3, 'Fall'), (4, 'Winter')]
Equivalent to:
def enumerate(sequence, start=0):
n = start
for elem in sequence:
yield n, elem
n += 1
New in version 2.3.
Changed in version 2.6: The start parameter was added.
The arguments are a string and optional globals and locals. If provided, globals must be a dictionary. If provided, locals can be any mapping object.
Changed in version 2.4: formerly locals was required to be a dictionary.
The expression argument is parsed and evaluated as a Python expression (technically speaking, a condition list) using the globals and locals dictionaries as global and local namespace. If the globals dictionary is present and lacks ‘__builtins__’, the current globals are copied into globals before expression is parsed. This means that expression normally has full access to the standard __builtin__ module and restricted environments are propagated. If the locals dictionary is omitted it defaults to the globals dictionary. If both dictionaries are omitted, the expression is executed in the environment where eval() is called. The return value is the result of the evaluated expression. Syntax errors are reported as exceptions. Example:
>>> x = 1
>>> print eval('x+1')
2
This function can also be used to execute arbitrary code objects (such as those created by compile()). In this case pass a code object instead of a string. If the code object has been compiled with 'exec' as the mode argument, eval()‘s return value will be None.
Hints: dynamic execution of statements is supported by the exec statement. Execution of statements from a file is supported by the execfile() function. The globals() and locals() functions returns the current global and local dictionary, respectively, which may be useful to pass around for use by eval() or execfile().
See ast.literal_eval() for a function that can safely evaluate strings with expressions containing only literals.
This function is similar to the exec statement, but parses a file instead of a string. It is different from the import statement in that it does not use the module administration — it reads the file unconditionally and does not create a new module. [1]
The arguments are a file name and two optional dictionaries. The file is parsed and evaluated as a sequence of Python statements (similarly to a module) using the globals and locals dictionaries as global and local namespace. If provided, locals can be any mapping object. Remember that at module level, globals and locals are the same dictionary. If two separate objects are passed as globals and locals, the code will be executed as if it were embedded in a class definition.
Changed in version 2.4: formerly locals was required to be a dictionary.
If the locals dictionary is omitted it defaults to the globals dictionary. If both dictionaries are omitted, the expression is executed in the environment where execfile() is called. The return value is None.
Note
The default locals act as described for function locals() below: modifications to the default locals dictionary should not be attempted. Pass an explicit locals dictionary if you need to see effects of the code on locals after function execfile() returns. execfile() cannot be used reliably to modify a function’s locals.
Constructor function for the file type, described further in section File Objects. The constructor’s arguments are the same as those of the open() built-in function described below.
When opening a file, it’s preferable to use open() instead of invoking this constructor directly. file is more suited to type testing (for example, writing isinstance(f, file)).
New in version 2.2.
Construct a list from those elements of iterable for which function returns true. iterable may be either a sequence, a container which supports iteration, or an iterator. If iterable is a string or a tuple, the result also has that type; otherwise it is always a list. If function is None, the identity function is assumed, that is, all elements of iterable that are false are removed.
Note that filter(function, iterable) is equivalent to [item for item in iterable if function(item)] if function is not None and [item for item in iterable if item] if function is None.
See itertools.ifilter() and itertools.ifilterfalse() for iterator versions of this function, including a variation that filters for elements where the function returns false.
Convert a string or a number to floating point. If the argument is a string, it must contain a possibly signed decimal or floating point number, possibly embedded in whitespace. The argument may also be [+|-]nan or [+|-]inf. Otherwise, the argument may be a plain or long integer or a floating point number, and a floating point number with the same value (within Python’s floating point precision) is returned. If no argument is given, returns 0.0.
Note
When passing in a string, values for NaN and Infinity may be returned, depending on the underlying C library. Float accepts the strings nan, inf and -inf for NaN and positive or negative infinity. The case and a leading + are ignored as well as a leading - is ignored for NaN. Float always represents NaN and infinity as nan, inf or -inf.
The float type is described in Numeric Types — int, float, long, complex.
Convert a value to a “formatted” representation, as controlled by format_spec. The interpretation of format_spec will depend on the type of the value argument, however there is a standard formatting syntax that is used by most built-in types: Format Specification Mini-Language.
Note
format(value, format_spec) merely calls value.__format__(format_spec).
New in version 2.6.
Return a new frozenset object, optionally with elements taken from iterable. frozenset is a built-in class. See frozenset and Set Types — set, frozenset for documentation about this class.
For other containers see the built-in set, list, tuple, and dict classes, as well as the collections module.
New in version 2.4.
Return the value of the named attribute of object. name must be a string. If the string is the name of one of the object’s attributes, the result is the value of that attribute. For example, getattr(x, 'foobar') is equivalent to x.foobar. If the named attribute does not exist, default is returned if provided, otherwise AttributeError is raised.
Return a dictionary representing the current global symbol table. This is always the dictionary of the current module (inside a function or method, this is the module where it is defined, not the module from which it is called).
The arguments are an object and a string. The result is True if the string is the name of one of the object’s attributes, False if not. (This is implemented by calling getattr(object, name) and seeing whether it raises an exception or not.)
Return the hash value of the object (if it has one). Hash values are integers. They are used to quickly compare dictionary keys during a dictionary lookup. Numeric values that compare equal have the same hash value (even if they are of different types, as is the case for 1 and 1.0).
Invoke the built-in help system. (This function is intended for interactive use.) If no argument is given, the interactive help system starts on the interpreter console. If the argument is a string, then the string is looked up as the name of a module, function, class, method, keyword, or documentation topic, and a help page is printed on the console. If the argument is any other kind of object, a help page on the object is generated.
This function is added to the built-in namespace by the site module.
New in version 2.2.
Convert an integer number (of any size) to a hexadecimal string. The result is a valid Python expression.
Note
To obtain a hexadecimal string representation for a float, use the float.hex() method.
Changed in version 2.4: Formerly only returned an unsigned literal.
Return the “identity” of an object. This is an integer (or long integer) which is guaranteed to be unique and constant for this object during its lifetime. Two objects with non-overlapping lifetimes may have the same id() value.
CPython implementation detail: This is the address of the object in memory.
Equivalent to eval(raw_input(prompt)).
This function does not catch user errors. If the input is not syntactically valid, a SyntaxError will be raised. Other exceptions may be raised if there is an error during evaluation.
If the readline module was loaded, then input() will use it to provide elaborate line editing and history features.
Consider using the raw_input() function for general input from users.
Convert a number or string x to an integer, or return 0 if no arguments are given. If x is a number, it can be a plain integer, a long integer, or a floating point number. If x is floating point, the conversion truncates towards zero. If the argument is outside the integer range, the function returns a long object instead.
If x is not a number or if base is given, then x must be a string or Unicode object representing an integer literal in radix base. Optionally, the literal can be preceded by + or - (with no space in between) and surrounded by whitespace. A base-n literal consists of the digits 0 to n-1, with a to z (or A to Z) having values 10 to 35. The default base is 10. The allowed values are 0 and 2-36. Base-2, -8, and -16 literals can be optionally prefixed with 0b/0B, 0o/0O/0, or 0x/0X, as with integer literals in code. Base 0 means to interpret the string exactly as an integer literal, so that the actual base is 2, 8, 10, or 16.
The integer type is described in Numeric Types — int, float, long, complex.
Return true if the object argument is an instance of the classinfo argument, or of a (direct, indirect or virtual) subclass thereof. Also return true if classinfo is a type object (new-style class) and object is an object of that type or of a (direct, indirect or virtual) subclass thereof. If object is not a class instance or an object of the given type, the function always returns false. If classinfo is neither a class object nor a type object, it may be a tuple of class or type objects, or may recursively contain other such tuples (other sequence types are not accepted). If classinfo is not a class, type, or tuple of classes, types, and such tuples, a TypeError exception is raised.
Changed in version 2.2: Support for a tuple of type information was added.
Return true if class is a subclass (direct, indirect or virtual) of classinfo. A class is considered a subclass of itself. classinfo may be a tuple of class objects, in which case every entry in classinfo will be checked. In any other case, a TypeError exception is raised.
Changed in version 2.3: Support for a tuple of type information was added.
Return an iterator object. The first argument is interpreted very differently depending on the presence of the second argument. Without a second argument, o must be a collection object which supports the iteration protocol (the __iter__() method), or it must support the sequence protocol (the __getitem__() method with integer arguments starting at 0). If it does not support either of those protocols, TypeError is raised. If the second argument, sentinel, is given, then o must be a callable object. The iterator created in this case will call o with no arguments for each call to its next() method; if the value returned is equal to sentinel, StopIteration will be raised, otherwise the value will be returned.
One useful application of the second form of iter() is to read lines of a file until a certain line is reached. The following example reads a file until the readline() method returns an empty string:
with open('mydata.txt') as fp:
for line in iter(fp.readline, ''):
process_line(line)
New in version 2.2.
Return the length (the number of items) of an object. The argument may be a sequence (string, tuple or list) or a mapping (dictionary).
Return a list whose items are the same and in the same order as iterable‘s items. iterable may be either a sequence, a container that supports iteration, or an iterator object. If iterable is already a list, a copy is made and returned, similar to iterable[:]. For instance, list('abc') returns ['a', 'b', 'c'] and list( (1, 2, 3) ) returns [1, 2, 3]. If no argument is given, returns a new empty list, [].
list is a mutable sequence type, as documented in Sequence Types — str, unicode, list, tuple, bytearray, buffer, xrange. For other containers see the built in dict, set, and tuple classes, and the collections module.
Update and return a dictionary representing the current local symbol table. Free variables are returned by locals() when it is called in function blocks, but not in class blocks.
Note
The contents of this dictionary should not be modified; changes may not affect the values of local and free variables used by the interpreter.
Convert a string or number to a long integer. If the argument is a string, it must contain a possibly signed number of arbitrary size, possibly embedded in whitespace. The base argument is interpreted in the same way as for int(), and may only be given when x is a string. Otherwise, the argument may be a plain or long integer or a floating point number, and a long integer with the same value is returned. Conversion of floating point numbers to integers truncates (towards zero). If no arguments are given, returns 0L.
The long type is described in Numeric Types — int, float, long, complex.
Apply function to every item of iterable and return a list of the results. If additional iterable arguments are passed, function must take that many arguments and is applied to the items from all iterables in parallel. If one iterable is shorter than another it is assumed to be extended with None items. If function is None, the identity function is assumed; if there are multiple arguments, map() returns a list consisting of tuples containing the corresponding items from all iterables (a kind of transpose operation). The iterable arguments may be a sequence or any iterable object; the result is always a list.
Return the largest item in an iterable or the largest of two or more arguments.
If one positional argument is provided, iterable must be a non-empty iterable (such as a non-empty string, tuple or list). The largest item in the iterable is returned. If two or more positional arguments are provided, the largest of the positional arguments is returned.
The optional key argument specifies a one-argument ordering function like that used for list.sort(). The key argument, if supplied, must be in keyword form (for example, max(a,b,c,key=func)).
Changed in version 2.5: Added support for the optional key argument.
Return a “memory view” object created from the given argument. See memoryview type for more information.
Return the smallest item in an iterable or the smallest of two or more arguments.
If one positional argument is provided, iterable must be a non-empty iterable (such as a non-empty string, tuple or list). The smallest item in the iterable is returned. If two or more positional arguments are provided, the smallest of the positional arguments is returned.
The optional key argument specifies a one-argument ordering function like that used for list.sort(). The key argument, if supplied, must be in keyword form (for example, min(a,b,c,key=func)).
Changed in version 2.5: Added support for the optional key argument.
Retrieve the next item from the iterator by calling its next() method. If default is given, it is returned if the iterator is exhausted, otherwise StopIteration is raised.
New in version 2.6.
Return a new featureless object. object is a base for all new style classes. It has the methods that are common to all instances of new style classes.
New in version 2.2.
Changed in version 2.3: This function does not accept any arguments. Formerly, it accepted arguments but ignored them.
Convert an integer number (of any size) to an octal string. The result is a valid Python expression.
Changed in version 2.4: Formerly only returned an unsigned literal.
Open a file, returning an object of the file type described in section File Objects. If the file cannot be opened, IOError is raised. When opening a file, it’s preferable to use open() instead of invoking the file constructor directly.
The first two arguments are the same as for stdio‘s fopen(): name is the file name to be opened, and mode is a string indicating how the file is to be opened.
The most commonly-used values of mode are 'r' for reading, 'w' for writing (truncating the file if it already exists), and 'a' for appending (which on some Unix systems means that all writes append to the end of the file regardless of the current seek position). If mode is omitted, it defaults to 'r'. The default is to use text mode, which may convert '\n' characters to a platform-specific representation on writing and back on reading. Thus, when opening a binary file, you should append 'b' to the mode value to open the file in binary mode, which will improve portability. (Appending 'b' is useful even on systems that don’t treat binary and text files differently, where it serves as documentation.) See below for more possible values of mode.
The optional buffering argument specifies the file’s desired buffer size: 0 means unbuffered, 1 means line buffered, any other positive value means use a buffer of (approximately) that size (in bytes). A negative buffering means to use the system default, which is usually line buffered for tty devices and fully buffered for other files. If omitted, the system default is used. [2]
Modes 'r+', 'w+' and 'a+' open the file for updating (note that 'w+' truncates the file). Append 'b' to the mode to open the file in binary mode, on systems that differentiate between binary and text files; on systems that don’t have this distinction, adding the 'b' has no effect.
In addition to the standard fopen() values mode may be 'U' or 'rU'. Python is usually built with universal newlines support; supplying 'U' opens the file as a text file, but lines may be terminated by any of the following: the Unix end-of-line convention '\n', the Macintosh convention '\r', or the Windows convention '\r\n'. All of these external representations are seen as '\n' by the Python program. If Python is built without universal newlines support a mode with 'U' is the same as normal text mode. Note that file objects so opened also have an attribute called newlines which has a value of None (if no newlines have yet been seen), '\n', '\r', '\r\n', or a tuple containing all the newline types seen.
Python enforces that the mode, after stripping 'U', begins with 'r', 'w' or 'a'.
Python provides many file handling modules including fileinput, os, os.path, tempfile, and shutil.
Changed in version 2.5: Restriction on first letter of mode string introduced.
Given a string of length one, return an integer representing the Unicode code point of the character when the argument is a unicode object, or the value of the byte when the argument is an 8-bit string. For example, ord('a') returns the integer 97, ord(u'\u2020') returns 8224. This is the inverse of chr() for 8-bit strings and of unichr() for unicode objects. If a unicode argument is given and Python was built with UCS2 Unicode, then the character’s code point must be in the range [0..65535] inclusive; otherwise the string length is two, and a TypeError will be raised.
Return x to the power y; if z is present, return x to the power y, modulo z (computed more efficiently than pow(x, y) % z). The two-argument form pow(x, y) is equivalent to using the power operator: x**y.
The arguments must have numeric types. With mixed operand types, the coercion rules for binary arithmetic operators apply. For int and long int operands, the result has the same type as the operands (after coercion) unless the second argument is negative; in that case, all arguments are converted to float and a float result is delivered. For example, 10**2 returns 100, but 10**-2 returns 0.01. (This last feature was added in Python 2.2. In Python 2.1 and before, if both arguments were of integer types and the second argument was negative, an exception was raised.) If the second argument is negative, the third argument must be omitted. If z is present, x and y must be of integer types, and y must be non-negative. (This restriction was added in Python 2.2. In Python 2.1 and before, floating 3-argument pow() returned platform-dependent results depending on floating-point rounding accidents.)
Print objects to the stream file, separated by sep and followed by end. sep, end and file, if present, must be given as keyword arguments.
All non-keyword arguments are converted to strings like str() does and written to the stream, separated by sep and followed by end. Both sep and end must be strings; they can also be None, which means to use the default values. If no objects are given, print() will just write end.
The file argument must be an object with a write(string) method; if it is not present or None, sys.stdout will be used. Output buffering is determined by file. Use file.flush() to ensure, for instance, immediate appearance on a screen.
Note
This function is not normally available as a built-in since the name print is recognized as the print statement. To disable the statement and use the print() function, use this future statement at the top of your module:
from __future__ import print_function
New in version 2.6.
Return a property attribute for new-style classes (classes that derive from object).
fget is a function for getting an attribute value, likewise fset is a function for setting, and fdel a function for del’ing, an attribute. Typical use is to define a managed attribute x:
class C(object):
def __init__(self):
self._x = None
def getx(self):
return self._x
def setx(self, value):
self._x = value
def delx(self):
del self._x
x = property(getx, setx, delx, "I'm the 'x' property.")
If then c is an instance of C, c.x will invoke the getter, c.x = value will invoke the setter and del c.x the deleter.
If given, doc will be the docstring of the property attribute. Otherwise, the property will copy fget‘s docstring (if it exists). This makes it possible to create read-only properties easily using property() as a decorator:
class Parrot(object):
def __init__(self):
self._voltage = 100000
@property
def voltage(self):
"""Get the current voltage."""
return self._voltage
turns the voltage() method into a “getter” for a read-only attribute with the same name.
A property object has getter, setter, and deleter methods usable as decorators that create a copy of the property with the corresponding accessor function set to the decorated function. This is best explained with an example:
class C(object):
def __init__(self):
self._x = None
@property
def x(self):
"""I'm the 'x' property."""
return self._x
@x.setter
def x(self, value):
self._x = value
@x.deleter
def x(self):
del self._x
This code is exactly equivalent to the first example. Be sure to give the additional functions the same name as the original property (x in this case.)
The returned property also has the attributes fget, fset, and fdel corresponding to the constructor arguments.
New in version 2.2.
Changed in version 2.5: Use fget‘s docstring if no doc given.
Changed in version 2.6: The getter, setter, and deleter attributes were added.
This is a versatile function to create lists containing arithmetic progressions. It is most often used in for loops. The arguments must be plain integers. If the step argument is omitted, it defaults to 1. If the start argument is omitted, it defaults to 0. The full form returns a list of plain integers [start, start + step, start + 2 * step, ...]. If step is positive, the last element is the largest start + i * step less than stop; if step is negative, the last element is the smallest start + i * step greater than stop. step must not be zero (or else ValueError is raised). Example:
>>> range(10)
[0, 1, 2, 3, 4, 5, 6, 7, 8, 9]
>>> range(1, 11)
[1, 2, 3, 4, 5, 6, 7, 8, 9, 10]
>>> range(0, 30, 5)
[0, 5, 10, 15, 20, 25]
>>> range(0, 10, 3)
[0, 3, 6, 9]
>>> range(0, -10, -1)
[0, -1, -2, -3, -4, -5, -6, -7, -8, -9]
>>> range(0)
[]
>>> range(1, 0)
[]
If the prompt argument is present, it is written to standard output without a trailing newline. The function then reads a line from input, converts it to a string (stripping a trailing newline), and returns that. When EOF is read, EOFError is raised. Example:
>>> s = raw_input('--> ')
--> Monty Python's Flying Circus
>>> s
"Monty Python's Flying Circus"
If the readline module was loaded, then raw_input() will use it to provide elaborate line editing and history features.
Apply function of two arguments cumulatively to the items of iterable, from left to right, so as to reduce the iterable to a single value. For example, reduce(lambda x, y: x+y, [1, 2, 3, 4, 5]) calculates ((((1+2)+3)+4)+5). The left argument, x, is the accumulated value and the right argument, y, is the update value from the iterable. If the optional initializer is present, it is placed before the items of the iterable in the calculation, and serves as a default when the iterable is empty. If initializer is not given and iterable contains only one item, the first item is returned. Roughly equivalent to:
def reduce(function, iterable, initializer=None):
it = iter(iterable)
if initializer is None:
try:
initializer = next(it)
except StopIteration:
raise TypeError('reduce() of empty sequence with no initial value')
accum_value = initializer
for x in it:
accum_value = function(accum_value, x)
return accum_value
Reload a previously imported module. The argument must be a module object, so it must have been successfully imported before. This is useful if you have edited the module source file using an external editor and want to try out the new version without leaving the Python interpreter. The return value is the module object (the same as the module argument).
When reload(module) is executed:
There are a number of other caveats:
If a module is syntactically correct but its initialization fails, the first import statement for it does not bind its name locally, but does store a (partially initialized) module object in sys.modules. To reload the module you must first import it again (this will bind the name to the partially initialized module object) before you can reload() it.
When a module is reloaded, its dictionary (containing the module’s global variables) is retained. Redefinitions of names will override the old definitions, so this is generally not a problem. If the new version of a module does not define a name that was defined by the old version, the old definition remains. This feature can be used to the module’s advantage if it maintains a global table or cache of objects — with a try statement it can test for the table’s presence and skip its initialization if desired:
try:
cache
except NameError:
cache = {}
It is legal though generally not very useful to reload built-in or dynamically loaded modules, except for sys, __main__ and __builtin__. In many cases, however, extension modules are not designed to be initialized more than once, and may fail in arbitrary ways when reloaded.
If a module imports objects from another module using from ... import ..., calling reload() for the other module does not redefine the objects imported from it — one way around this is to re-execute the from statement, another is to use import and qualified names (module.*name*) instead.
If a module instantiates instances of a class, reloading the module that defines the class does not affect the method definitions of the instances — they continue to use the old class definition. The same is true for derived classes.
Return a string containing a printable representation of an object. This is the same value yielded by conversions (reverse quotes). It is sometimes useful to be able to access this operation as an ordinary function. For many types, this function makes an attempt to return a string that would yield an object with the same value when passed to eval(), otherwise the representation is a string enclosed in angle brackets that contains the name of the type of the object together with additional information often including the name and address of the object. A class can control what this function returns for its instances by defining a __repr__() method.
Return a reverse iterator. seq must be an object which has a __reversed__() method or supports the sequence protocol (the __len__() method and the __getitem__() method with integer arguments starting at 0).
New in version 2.4.
Changed in version 2.6: Added the possibility to write a custom __reversed__() method.
Return the floating point value number rounded to ndigits digits after the decimal point. If ndigits is omitted, it defaults to zero. The result is a floating point number. Values are rounded to the closest multiple of 10 to the power minus ndigits; if two multiples are equally close, rounding is done away from 0 (so. for example, round(0.5) is 1.0 and round(-0.5) is -1.0).
Note
The behavior of round() for floats can be surprising: for example, round(2.675, 2) gives 2.67 instead of the expected 2.68. This is not a bug: it’s a result of the fact that most decimal fractions can’t be represented exactly as a float. See Floating Point Arithmetic: Issues and Limitations for more information.
Return a new set object, optionally with elements taken from iterable. set is a built-in class. See set and Set Types — set, frozenset for documentation about this class.
For other containers see the built-in frozenset, list, tuple, and dict classes, as well as the collections module.
New in version 2.4.
This is the counterpart of getattr(). The arguments are an object, a string and an arbitrary value. The string may name an existing attribute or a new attribute. The function assigns the value to the attribute, provided the object allows it. For example, setattr(x, 'foobar', 123) is equivalent to x.foobar = 123.
Return a slice object representing the set of indices specified by range(start, stop, step). The start and step arguments default to None. Slice objects have read-only data attributes start, stop and step which merely return the argument values (or their default). They have no other explicit functionality; however they are used by Numerical Python and other third party extensions. Slice objects are also generated when extended indexing syntax is used. For example: a[start:stop:step] or a[start:stop, i]. See itertools.islice() for an alternate version that returns an iterator.
Return a new sorted list from the items in iterable.
The optional arguments cmp, key, and reverse have the same meaning as those for the list.sort() method (described in section Mutable Sequence Types).
cmp specifies a custom comparison function of two arguments (iterable elements) which should return a negative, zero or positive number depending on whether the first argument is considered smaller than, equal to, or larger than the second argument: cmp=lambda x,y: cmp(x.lower(), y.lower()). The default value is None.
key specifies a function of one argument that is used to extract a comparison key from each list element: key=str.lower. The default value is None (compare the elements directly).
reverse is a boolean value. If set to True, then the list elements are sorted as if each comparison were reversed.
In general, the key and reverse conversion processes are much faster than specifying an equivalent cmp function. This is because cmp is called multiple times for each list element while key and reverse touch each element only once. Use functools.cmp_to_key() to convert an old-style cmp function to a key function.
For sorting examples and a brief sorting tutorial, see Sorting HowTo.
New in version 2.4.
Return a static method for function.
A static method does not receive an implicit first argument. To declare a static method, use this idiom:
class C(object):
@staticmethod
def f(arg1, arg2, ...):
...
The @staticmethod form is a function decorator – see the description of function definitions in Function definitions for details.
It can be called either on the class (such as C.f()) or on an instance (such as C().f()). The instance is ignored except for its class.
Static methods in Python are similar to those found in Java or C++. Also see classmethod() for a variant that is useful for creating alternate class constructors.
For more information on static methods, consult the documentation on the standard type hierarchy in The standard type hierarchy.
New in version 2.2.
Changed in version 2.4: Function decorator syntax added.
Return a string containing a nicely printable representation of an object. For strings, this returns the string itself. The difference with repr(object) is that str(object) does not always attempt to return a string that is acceptable to eval(); its goal is to return a printable string. If no argument is given, returns the empty string, ''.
For more information on strings see Sequence Types — str, unicode, list, tuple, bytearray, buffer, xrange which describes sequence functionality (strings are sequences), and also the string-specific methods described in the String Methods section. To output formatted strings use template strings or the % operator described in the String Formatting Operations section. In addition see the String Services section. See also unicode().
Sums start and the items of an iterable from left to right and returns the total. start defaults to 0. The iterable‘s items are normally numbers, and the start value is not allowed to be a string.
For some use cases, there are good alternatives to sum(). The preferred, fast way to concatenate a sequence of strings is by calling ''.join(sequence). To add floating point values with extended precision, see math.fsum(). To concatenate a series of iterables, consider using itertools.chain().
New in version 2.3.
Return a proxy object that delegates method calls to a parent or sibling class of type. This is useful for accessing inherited methods that have been overridden in a class. The search order is same as that used by getattr() except that the type itself is skipped.
The __mro__ attribute of the type lists the method resolution search order used by both getattr() and super(). The attribute is dynamic and can change whenever the inheritance hierarchy is updated.
If the second argument is omitted, the super object returned is unbound. If the second argument is an object, isinstance(obj, type) must be true. If the second argument is a type, issubclass(type2, type) must be true (this is useful for classmethods).
Note
super() only works for new-style classes.
There are two typical use cases for super. In a class hierarchy with single inheritance, super can be used to refer to parent classes without naming them explicitly, thus making the code more maintainable. This use closely parallels the use of super in other programming languages.
The second use case is to support cooperative multiple inheritance in a dynamic execution environment. This use case is unique to Python and is not found in statically compiled languages or languages that only support single inheritance. This makes it possible to implement “diamond diagrams” where multiple base classes implement the same method. Good design dictates that this method have the same calling signature in every case (because the order of calls is determined at runtime, because that order adapts to changes in the class hierarchy, and because that order can include sibling classes that are unknown prior to runtime).
For both use cases, a typical superclass call looks like this:
class C(B):
def method(self, arg):
super(C, self).method(arg)
Note that super() is implemented as part of the binding process for explicit dotted attribute lookups such as super().__getitem__(name). It does so by implementing its own __getattribute__() method for searching classes in a predictable order that supports cooperative multiple inheritance. Accordingly, super() is undefined for implicit lookups using statements or operators such as super()[name].
Also note that super() is not limited to use inside methods. The two argument form specifies the arguments exactly and makes the appropriate references.
For practical suggestions on how to design cooperative classes using super(), see guide to using super().
New in version 2.2.
Return a tuple whose items are the same and in the same order as iterable‘s items. iterable may be a sequence, a container that supports iteration, or an iterator object. If iterable is already a tuple, it is returned unchanged. For instance, tuple('abc') returns ('a', 'b', 'c') and tuple([1, 2, 3]) returns (1, 2, 3). If no argument is given, returns a new empty tuple, ().
tuple is an immutable sequence type, as documented in Sequence Types — str, unicode, list, tuple, bytearray, buffer, xrange. For other containers see the built in dict, list, and set classes, and the collections module.
With one argument, return the type of an object. The return value is a type object. The isinstance() built-in function is recommended for testing the type of an object.
With three arguments, return a new type object. This is essentially a dynamic form of the class statement. The name string is the class name and becomes the __name__ attribute; the bases tuple itemizes the base classes and becomes the __bases__ attribute; and the dict dictionary is the namespace containing definitions for class body and becomes the __dict__ attribute. For example, the following two statements create identical type objects:
>>> class X(object):
... a = 1
...
>>> X = type('X', (object,), dict(a=1))
New in version 2.2.
Return the Unicode string of one character whose Unicode code is the integer i. For example, unichr(97) returns the string u'a'. This is the inverse of ord() for Unicode strings. The valid range for the argument depends how Python was configured – it may be either UCS2 [0..0xFFFF] or UCS4 [0..0x10FFFF]. ValueError is raised otherwise. For ASCII and 8-bit strings see chr().
New in version 2.0.
Return the Unicode string version of object using one of the following modes:
If encoding and/or errors are given, unicode() will decode the object which can either be an 8-bit string or a character buffer using the codec for encoding. The encoding parameter is a string giving the name of an encoding; if the encoding is not known, LookupError is raised. Error handling is done according to errors; this specifies the treatment of characters which are invalid in the input encoding. If errors is 'strict' (the default), a ValueError is raised on errors, while a value of 'ignore' causes errors to be silently ignored, and a value of 'replace' causes the official Unicode replacement character, U+FFFD, to be used to replace input characters which cannot be decoded. See also the codecs module.
If no optional parameters are given, unicode() will mimic the behaviour of str() except that it returns Unicode strings instead of 8-bit strings. More precisely, if object is a Unicode string or subclass it will return that Unicode string without any additional decoding applied.
For objects which provide a __unicode__() method, it will call this method without arguments to create a Unicode string. For all other objects, the 8-bit string version or representation is requested and then converted to a Unicode string using the codec for the default encoding in 'strict' mode.
For more information on Unicode strings see Sequence Types — str, unicode, list, tuple, bytearray, buffer, xrange which describes sequence functionality (Unicode strings are sequences), and also the string-specific methods described in the String Methods section. To output formatted strings use template strings or the % operator described in the String Formatting Operations section. In addition see the String Services section. See also str().
New in version 2.0.
Changed in version 2.2: Support for __unicode__() added.
Return the __dict__ attribute for a module, class, instance, or any other object with a __dict__ attribute.
Objects such as modules and instances have an updateable __dict__ attribute; however, other objects may have write restrictions on their __dict__ attributes (for example, new-style classes use a dictproxy to prevent direct dictionary updates).
Without an argument, vars() acts like locals(). Note, the locals dictionary is only useful for reads since updates to the locals dictionary are ignored.
This function is very similar to range(), but returns an xrange object instead of a list. This is an opaque sequence type which yields the same values as the corresponding list, without actually storing them all simultaneously. The advantage of xrange() over range() is minimal (since xrange() still has to create the values when asked for them) except when a very large range is used on a memory-starved machine or when all of the range’s elements are never used (such as when the loop is usually terminated with break). For more information on xrange objects, see XRange Type and Sequence Types — str, unicode, list, tuple, bytearray, buffer, xrange.
CPython implementation detail: xrange() is intended to be simple and fast. Implementations may impose restrictions to achieve this. The C implementation of Python restricts all arguments to native C longs (“short” Python integers), and also requires that the number of elements fit in a native C long. If a larger range is needed, an alternate version can be crafted using the itertools module: islice(count(start, step), (stop-start+step-1+2*(step<0))//step).
This function returns a list of tuples, where the i-th tuple contains the i-th element from each of the argument sequences or iterables. The returned list is truncated in length to the length of the shortest argument sequence. When there are multiple arguments which are all of the same length, zip() is similar to map() with an initial argument of None. With a single sequence argument, it returns a list of 1-tuples. With no arguments, it returns an empty list.
The left-to-right evaluation order of the iterables is guaranteed. This makes possible an idiom for clustering a data series into n-length groups using zip(*[iter(s)]*n).
zip() in conjunction with the * operator can be used to unzip a list:
>>> x = [1, 2, 3]
>>> y = [4, 5, 6]
>>> zipped = zip(x, y)
>>> zipped
[(1, 4), (2, 5), (3, 6)]
>>> x2, y2 = zip(*zipped)
>>> x == list(x2) and y == list(y2)
True
New in version 2.0.
Changed in version 2.4: Formerly, zip() required at least one argument and zip() raised a TypeError instead of returning an empty list.
Note
This is an advanced function that is not needed in everyday Python programming, unlike importlib.import_module().
This function is invoked by the import statement. It can be replaced (by importing the __builtin__ module and assigning to __builtin__.__import__) in order to change semantics of the import statement, but nowadays it is usually simpler to use import hooks (see PEP 302). Direct use of __import__() is rare, except in cases where you want to import a module whose name is only known at runtime.
The function imports the module name, potentially using the given globals and locals to determine how to interpret the name in a package context. The fromlist gives the names of objects or submodules that should be imported from the module given by name. The standard implementation does not use its locals argument at all, and uses its globals only to determine the package context of the import statement.
level specifies whether to use absolute or relative imports. The default is -1 which indicates both absolute and relative imports will be attempted. 0 means only perform absolute imports. Positive values for level indicate the number of parent directories to search relative to the directory of the module calling __import__().
When the name variable is of the form package.module, normally, the top-level package (the name up till the first dot) is returned, not the module named by name. However, when a non-empty fromlist argument is given, the module named by name is returned.
For example, the statement import spam results in bytecode resembling the following code:
spam = __import__('spam', globals(), locals(), [], -1)
The statement import spam.ham results in this call:
spam = __import__('spam.ham', globals(), locals(), [], -1)
Note how __import__() returns the toplevel module here because this is the object that is bound to a name by the import statement.
On the other hand, the statement from spam.ham import eggs, sausage as saus results in
_temp = __import__('spam.ham', globals(), locals(), ['eggs', 'sausage'], -1)
eggs = _temp.eggs
saus = _temp.sausage
Here, the spam.ham module is returned from __import__(). From this object, the names to import are retrieved and assigned to their respective names.
If you simply want to import a module (potentially within a package) by name, use importlib.import_module().
Changed in version 2.5: The level parameter was added.
Changed in version 2.5: Keyword support for parameters was added.
There are several built-in functions that are no longer essential to learn, know or use in modern Python programming. They have been kept here to maintain backwards compatibility with programs written for older versions of Python.
Python programmers, trainers, students and book writers should feel free to bypass these functions without concerns about missing something important.
The function argument must be a callable object (a user-defined or built-in function or method, or a class object) and the args argument must be a sequence. The function is called with args as the argument list; the number of arguments is the length of the tuple. If the optional keywords argument is present, it must be a dictionary whose keys are strings. It specifies keyword arguments to be added to the end of the argument list. Calling apply() is different from just calling function(args), since in that case there is always exactly one argument. The use of apply() is equivalent to function(*args, **keywords).
Deprecated since version 2.3: Use function(*args, **keywords) instead of apply(function, args, keywords) (see Unpacking Argument Lists).
The object argument must be an object that supports the buffer call interface (such as strings, arrays, and buffers). A new buffer object will be created which references the object argument. The buffer object will be a slice from the beginning of object (or from the specified offset). The slice will extend to the end of object (or will have a length given by the size argument).
Return a tuple consisting of the two numeric arguments converted to a common type, using the same rules as used by arithmetic operations. If coercion is not possible, raise TypeError.
Enter string in the table of “interned” strings and return the interned string – which is string itself or a copy. Interning strings is useful to gain a little performance on dictionary lookup – if the keys in a dictionary are interned, and the lookup key is interned, the key comparisons (after hashing) can be done by a pointer compare instead of a string compare. Normally, the names used in Python programs are automatically interned, and the dictionaries used to hold module, class or instance attributes have interned keys.
Changed in version 2.3: Interned strings are not immortal (like they used to be in Python 2.2 and before); you must keep a reference to the return value of intern() around to benefit from it.
Footnotes
| [1] | It is used relatively rarely so does not warrant being made into a statement. |
| [2] | Specifying a buffer size currently has no effect on systems that don’t have setvbuf(). The interface to specify the buffer size is not done using a method that calls setvbuf(), because that may dump core when called after any I/O has been performed, and there’s no reliable way to determine whether this is the case. |
| [3] | In the current implementation, local variable bindings cannot normally be affected this way, but variables retrieved from other scopes (such as modules) can be. This may change. |